---

Epoxy Waterproofing Materials and More

Most Epoxy.com products can be used for waterproofing

---

Epoxy Gel Adhesives as Waterproofing

One big advantage of using a gel adhesive as a waterproofing system is that it goes on thick. These materials are the consistency of peanut butter, so you can build a thick layer exactly where you need it

Product #720 Cove Base Binder - can be used to install an integral cove base for most Epoxy.com Flooring Systems, to provide seamless wall to floor protection. This product makes an excellent patching material.

Product #2005 Low Modulus Fast Setting Epoxy Gel is a two component 100% solids  designed for shallow repair on either vertical or horizontal surfaces. This product is easy to mix and use and has the consistency of Vaseline petroleum jelly. Additionally, the product, because it is a 100% solids product, can be applied thicker on horizontal surfaces when required.

Product #2006 - Epoxy High-Mod Gel Adhesive and Bonding Resin  is a 100% solids high-mod epoxy gel adhesive used for vertical and overhead bonding applications and structural repairs. Epoxy High-Mod Gel Adhesive and Bonding Resin - Product #2006 is also used as a grout for anchor bolts, dowels and rebar. Epoxy High-Mod Gel Adhesive and Bonding Resin - Product #2006 Meets ASTM C881 Requirements for Type I, Type II, Grade 3, Class B, C, D, E.

Elastomeric Waterproofing Systems

• Epoxy.com Product #488 Aliphatic Waterproof Polyurethane Coating is a superior, new generation product exhibiting fast cure time, is waterproof and has excellent stain resistance. Epoxy.com Product #488 Aliphatic Polyurethane Waterproof Coating has very low odor and can be applied indoors in occupied areas. Epoxy.com Product #488 Aliphatic Waterproof Polyurethane  Coating is generally used as a clear or pigmented high gloss finish  Epoxy.com decorative and industrial flooring systems such as Epoxy.com Chip (waterproof) Flooring (garage floor finish).
• Epoxy.com System #495 Elastomeric Polyurethane Traffic Membrane System- is an Elastomeric Urethane Membrane System, that is liquid applied.  Epoxy.com System #495 Elastomeric Polyurethane Traffic Membrane System is seamless, elastomeric (flexible), and UV.  Thee qualities make it an excellent choice for outside applications in direct sun and weather, where water tightness, durability, and excellent appearance is required. Its elastomeric properties will allow horizontal movements up to 1/8 inch without breaking. Epoxy.com System #495 Elastomeric Polyurethane Traffic Membrane System has excellent abrasion and chemical resistance.  The surface of Epoxy.com System #495 Elastomeric Polyurethane Traffic Membrane System can be varied to achieve the required anti-skid and decorative look.

Water Proofing Cracks, Joints and Pipe Penetrations

Epoxy Injection

• Epoxy.com Product #301 Injection Resin, low Modulus  - a 100% solids low viscosity epoxy adhesive used to restore cracked structural concrete by the pressure injection method and to grout cracks in a horizontal plane by gravity.
• Epoxy.com Product #301SC  a longer Potlife version of Product #301
• Epoxy.com Product #301Cold a faster version of Product #301 typically used in Cold Temperature Cure applications, or where a very fast set is needed

Other Resources

See also: 100% solid Epoxy Coatings for waterproofing.