|
||
| [Contact Us] | ||
Epoxy.com Product #32
Flexible Epoxy Membrane and Mortar
Epoxy Crack Isolation System for most Epoxy.com Flooring and Coating Systems
GENERAL DESCRIPTION
Epoxy.com Product #32 Flexible Epoxy is a flexible resin used as an epoxy membrane and as a flexible epoxy mortar. Epoxy.com Product #32 Flexible Epoxy is a two component, 100% solids epoxy used as a base in many Epoxy.com Flexible Epoxy Floor and Mortar Systems. Flexible Epoxy resists cracking caused by horizontal substrate movement, providing a crack resistant, resilient, sound absorbent, waterproof, durable floor.
Epoxy.com Product #32 Flexible Epoxy offers stress-relieving properties for floor slabs that show movement or vibration. Product #32 Flexible Epoxy is excellent for use in areas such as mechanical equipment rooms, large animal rooms and activity centers.
ADVANTAGES
- Crack Resistant - Elasticity Allows Substrate Movement
- Ultimate Elongation of 140-150%
- Moisture Insensitive
- Reduces Noise Created by Mechanical Vibrations
- Waterproof
- Good Shock Absorption Qualities
- Good Chemical Resistance
- Meets USDA requirements
SURFACE PREPARATION
Surface must be clean and sound. Remove all dirt, laitance, grease curing compounds and other foreign matter by sandblasting, shot blasting, or mechanical abrasion. Remove water and dust from all surfaces with an oil-free blast immediately prior to application. See Epoxy.com Surface Preparation Guide for more details.
MIXING AND INSTALLATION INSTRUCTIONS
Application of Epoxy.com Product #32 Flexible Epoxy can be applied with brush roller or spray. When spraying back-roll to ensure good contact with surface. One coats at a minimum thickness of 32-40 mils each (40-50 square feet per gallon) is recommended. Do not use in temperatures below 50 degrees F, as cooler temperatures delay hardening.
SAFETY PRECAUTIONS
Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.
CLEANING
All tools and equipment should be cleaned before the system gels. Use MEK, Acetone, or any lacquer solvent.
APPLICATION PROPERTIES @75° F |
|
| Mix Ratio | 1:1 by volume |
| Working Life | 30-40 minutes |
| Color | White |
| Viscosity (mixed) | 4,800 CPS |
| Tack Free | 10-12 hours |
| Recoat | 12-48 hours |
| Full Set Time | 48-72 hours |
| Final Cure - Max Resistance | 5-10days |
| PHYSICAL AND PERFORMANCE PROPERTIES | |
| Tensile Strength (ASTM C-307) | 1650 psi |
| Ultimate Elongation (ASTM D-412) | 140-150% |
| Volatile Organic Content (VCC)
(EPA Method 24) |
25 g/l, Compliant to low VOC Rule 1113 in all 50 states |
| Adhesion to Concrete (ASTM D-7234) | 350-400+ psi (Concrete Fails) |
| Thermal Cycling ASTM C884 | No Cracking |
| Flammability ASTM D635 | Self Extinguishing |
| Hardness Shore A (ASTM D-2240) | 70-80 |
| Hardness Shore D (ASTM D-2240) | 60-65 |
| Impact Resistance (ASTM D-2794) | 16 ft. lbs. |
Proper mixing and installation is critical to the optimal success of all products. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
A Vermont Corporation
USA
We have products that have passed the test of time as well as the best new Systems available today.
Since 1980 - Over 45 years of the highest quality products
Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)
Closed for lunch from 12Noon to 1PM
321-206-1833 Customer Service - Ordering and Order Status
Katey Lambert-Fontaine - Vice President & Chief Operations Officer
katey@epoxy.com
352-533-2167 Technical Support
Norm Lambert - President & Technical Support Director
info@epoxy.com
Debby Lambert, Co-Founder and Strategic Planning
Website: www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service - 1-800-633-8253
[Home] [Catalog of Products] [MSDS in Acrobat Format] [Online Ordering Authorization Form]