Epoxy Installation Guides

How to Install Epoxy Resin Systems

GENERAL INFORMATION FOR INSTALLING EPOXY RESIN SYSTEMS

Proper mixing and installation is critical to the best success of all epoxy products. This page is to help you find the right installation information that you need to install Epoxy Resin Systems.

Surface Preparation for Epoxy Resin Installation

All quality installation start with quality surface preparation. This guide will help you to know how to properly prepare your substrate for installation of Epoxy or any other high quality resin system. Improper surface preparation could turn what seems to be a simple process into a lengthy, difficult repair.

Do and Don't do with epoxy.

These guides will help you to not make the common mistakes that people do and the things the people don't do that can lead to a problem or even a failure of your epoxy resin installation.

Job Supplies Required to Install Epoxy Resin Systems

This list is a suggested list of the materials that you will need for most typical epoxy coating systems. This list is also useful for installing roller applied coating systems like Epoxy.com Chip Flooring.

Epoxy Installation Guides

Epoxy Chip Flooring System Installation Guide

Epoxy Chip Flooring Installation Guide. Floors have a special role to play in interior design. The heavy technical demands made on floors often make the use of certain decorative products simply impossible. The use of color chips can change all that! Color chips are increasingly being used in combination with "wet" products such as Product #315 Seamless Polymeric Multi-Colored Flake Chip Floor Resurfacing System to create decorative floors with more to offer than other ornamental products...Quality! This installation guide takes you step by step through the installation of Epoxy Chip Flooring Product #315.

Product #1 High Build Epoxy Coating 21-27 mils - All Purpose Epoxy Floor Coating Installation Guide.

Product #1 All Purpose High Build Epoxy Floor Coating a two component, zero (0) VOC, 100% solids epoxy Hi-Build epoxy coating used for high foot traffic and light to moderate forklift traffic areas where abrasion resistance is required; for protection against mild corrosion and as a decorative waterproof coating for walls, floors, tanks, etc. Installation Guide For All Purpose High Build Epoxy Floor Coating #1.

1ESD / Conductive - Electrostatic Dissipative Epoxy Floor Coating Installation Guide

Conductive Epoxy Floor Coating Installation Guide - Product #1ESD Epoxy Coating System consists of Product #899 Epoxy Primer followed with one finish coat of Product #1ESD/Conductive Epoxy Coating. Product #1ESD/Conductive is available in pigmented finish only. Product #1ESD Epoxy Coating System will test in the "ESD" range, between 1,000,000 and 1,000,000,000 ohms electrical resistance when Product #1ESD/Conductive is applied over a non-conductive primer (or non-conductive bodycoat), and produces a 12-15 mil thick ESD floor coating system. This guide will take tell you how to install the Conduct Epoxy Floor Coating.

Product #2 High Chemical Resistance Epoxy Floor Coating Installation Guide

Chemical Resistant Epoxy Coating Product #2 is a two component, 100% solids, Zero "0" VOC epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. This guide will take take you through the steps to install the Conduct Epoxy Floor Coating.

Product #15 Chemical Resistant Epoxy Quartz Flooring

Product #15 Chemical Resistant Quartz Flooring Installation - Single Broadcast Installation Method

Product #633 Novolac Highly Chemical Resistant Novolac Epoxy Floor Coating Installation Guide

Product #633 Novolac Epoxy Chemical Resistant Epoxy Coating is a 100% solids epoxy Novolac coating ideal for harsh chemical and solvent resistant applications. Product #633 Novolac Epoxy Chemical Resistant Epoxy Coating is used in secondary containment, solvent storage, pump pads, trenches, and other high exposure areas. This Installation Guide will help you install Product #633 Novolac Epoxy Chemical Resistant Epoxy Coating. You can also find more information with pictures about installation on this page the Epoxy.com Blog.

Epoxy Injection Installation

Epoxy Injection - This Guide will take you through the basics of doing epoxy injection. Epoxy injection is one of the most economical, to make a structural repair and waterproofing in cracked concrete.

Proper mixing and installation is critical to the optimal success of all products.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
A Vermont Corporation
USA

We have products that have passed the test of time as well as the best new Systems available today.

Since 1980 - Over 45 years of the highest quality products

Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)

Closed for lunch from 12Noon to 1PM

321-206-1833  Customer Service - Ordering and Order Status
Katey Lambert-Fontaine - Vice President & Chief Operations Officer
katey@epoxy.com

352-533-2167  Technical Support
Norm Lambert - President & Technical Support Director
info@epoxy.com

Debby Lambert, Co-Founder and Strategic Planning

Website: www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service - 1-800-633-8253

[Home] [Catalog of Products] [MSDS in Acrobat Format] [Online Ordering Authorization Form]