|
||
| [Contact Us] | ||
High Temperature High Strength Polyester Paste
High Temperature High Strength Gel
Epoxy.com PolyPaste
DESCRIPTION
Epoxy.com POLYPASTE is a fast-setting industrial filler paste used for manufacturing, fabrication and repair in aircraft, aerospace and other industries having requirements for above normal temperature exposure. Fast and permanent applications are achieved by POLYPASTE. The service temperature of Filler 7 is up to 400°F (205° C). POLYPASTE is used in the construction industry to seal cracks for injection and for patches used on concrete, wood, steel and other suitable construction materials.
Excellent machining and finishing results are accomplished by grinding, sanding, scraping, etc. When exposed to elevated temperatures,POLYPASTE has a tendency to darken but does not gas, bubble, or cause any finish distortion. This product does not contain wax and readily bonds to itself and other substrates such as FRP/SMC, hi-temp epoxy molds, aluminum, steel, cast iron, urethane foam parts, etc. POLYPASTE is non-metallic, non-conductive, and non-sparking.
APPLICATION PROCEDURES
Surface Preparation
Priorto application, area to be repaired should be roughened and thoroughly wiped clean to ensure proper adhesion.
Mixing Instructions
Thoroughly blend 100 parts resin (a golf ball sized mass) with 2 parts (2? strip) hardener for 1 1/2 minutes in a clean dry container carefully scraping sides and bottom of container during the mixing process to ensure uniformity.
Application
Epoxy.com POLYPASTE should be applied by buttering onto area to be repaired. After material has cured, the repair area can be sanded to desired surface finish.
STORAGE
POLYPASTE should be stored at a temperature less than 75° F. Storage above 75° F will shorten the shelf life and render the product unusable. The shelf life for this product is six months.
SAFETY PRECAUTIONS
For industrial use only.
Keep away from children. Refer to Material Health and Safety Data Sheet (MSDS
form) pertaining to this product before using.
Avoid contact with skin oreyes. In the event of eye splash or contact, immediately flush with water for 15 minutes and contact physician. It skin contact occurs, wash with mild soap and water. Prolonged or repeated exposure may cause skin and eye irritation. It is recommended that the user wear impervious gloves and safety glasses with side shields.
HANDLING PROPERTIES |
Test Method |
Value |
|
Mix Ratio (resin to hardener by wt or vol) |
ASTM D-2393 |
100R to 2H |
|
Viscosity or Consistency |
Thixotropic Paste |
|
|
Pot Life(100 gram mass @ 77°F |
ASTM D-2471 |
4-7 |
|
CureSchedule @77°F |
|
15-20 |
PHYSICAL PROPERTIES |
||
|
Density(lbs/gal) |
14.13 |
|
|
Specific Gravity (g/cm3) |
ASTM D-1475 |
1.70 |
|
Shore Hardness (D) |
ASTM D-792 |
88-90 |
|
Service Temperature (peak) |
ASTM D-2240 |
400°F |
|
Stock Colors |
|
Lt. Grey, Black |
|
|
|
Proper mixing and installation is critical to the optimal success of all products. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
A Vermont Corporation
USA
We have products that have passed the test of time as well as the best new Systems available today.
Since 1980 - Over 45 years of the highest quality products
Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)
Closed for lunch from 12Noon to 1PM
321-206-1833 Customer Service - Ordering and Order Status
Katey Lambert-Fontaine - Vice President & Chief Operations Officer
katey@epoxy.com
352-533-2167 Technical Support
Norm Lambert - President & Technical Support Director
info@epoxy.com
Debby Lambert, Co-Founder and Strategic Planning
Website: www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service - 1-800-633-8253
[Home] [Catalog of Products] [MSDS in Acrobat Format] [Online Ordering Authorization Form]