Epoxy Chip Flooring (flake flooring) Modified

Job History

The following is a direct quote from an email to us:

Here are some pics of the sunroom floor. The room is 500 square feet.

Chip Flooring modified to protect it from intense sunlight by top-coating with Epoxy.com  two component Urethane.

Two coats of 315 primer, base coat-brick red with twenty five pounds reclaimed (30 pounds used), two coats of Epoxy.com 2- Component Urethane sanded to take the jagged chips down, one final coat of 2-component Urethane all in that order. Have to tell you that it turned out better then we had hoped for.  It is a perfect color combination for a sunroom where the greens and falls colors really compliment each other.

Three coats of 2 component urethane, even with the intermediate sanding, is still pretty rough, but real safe (non-slip) since we have a misting system and tend to get the floor pretty wet at times. Should be plenty safe. I still have to put the final finish � round molding down to finish the floor/kick transition. Thank you so much for your help. Real pleasure to work with you and we are looking forward to another project in the future.

Forrest Trout
Lake, Wa.

Proper mixing and installation are critical to the success of all products. See Installation Tips, Techdata, and (M)SDS for more details, or contact us with any questions.

321-206-1833 Customer Service – Ordering and Order Status
Katey Lambert-Fontaine – Vice President & Chief Operations Officer
katey@epoxy.com

352-533-2167 Technical Support
Norm Lambert – President & Technical Support Director
info@epoxy.com

Debby Lambert, Co-Founder and Strategic Planning

Website: www.epoxy.com

24-hour Hazmat Emergency Telephone Response Service: 1-800-633-8253

[Home] [Catalog of Products] [SDS] [Online Ordering Authorization Form]