Epoxy Quartz Seamless Flooring

Double Broadcast Installation Method, Epoxy.com Product #15

The procedure for installing a double broadcast Epoxy.com Product #15 as a Seamless Epoxy Color Quartz Flooring System over concrete is very simple:

1. Properly prepare the substrate www.epoxy.com/surfaceprep.aspx.   You cannot have a quality installation of Epoxy Seamless Flooring without quality surface preparation.
2. Primer:
   1. If you cannot remove all the oil, use Epoxy.com Product #201  www.epoxy.com/201.htm - Oil Stop Primer.  Apply at a rate of 200-320 SF per gallon.  Allow to cure overnight.
   2. If you have a  moisture vapor transmission Problems, use Epoxy.com Product #830 www.epoxy.com/830.aspx - Anti-Moisture Primer at a rate of applied in a single coat of 12 mils (130 sq ft. per gallon) when relative humidity readings are below 95% or MVT readings are below 12# per 1000 sq ft./24 hrs. Higher readings require consultation with Epoxy.com Technical Services and may require a second coat of Epoxy.com Product #830 of 10 mils (160 sq ft. per gallon).Allow to cure overnight.
   3. For general purpose primer you can use Epoxy.com Product #15 at a rate of 250 SF per gallon. Allow to cure overnight.
3. Mixing small batches at a time apply Epoxy.com Product #15 Seamless Epoxy Quartz Flooring Resin at a rate of 100 sq ft per gallon.  Broadcast the Product #15 Seamless Epoxy Quart Flooring Resin with Epoxy.com Product #68 Seamless Epoxy Flooring Colored Quartz Aggregate - http://www.epoxy.com/68.htm -to saturation immediately at the end of each batch.  This will require about 0.4 lbs of Epoxy.com Seamless Epoxy Flooring Colored Quartz Aggregate per SF. Be sure to leave a wet edge to roll the next batch up against.  Continue this as you work your way across the floor.  Allow to cure 6-8 hours (typically overnight).
4. Sweep and vacuum off all loose Epoxy.com Product #68 Seamless Epoxy Colored Quartz Flooring Aggregate. Mix small batches of Epoxy.com Product #15 Seamless Clear Epoxy Quartz Flooring Resin and apply it with Squeegee at a rate of 80-90 SF per gallon.  Broadcasting immediately after each batch with Epoxy.com Product #68 Seamless Epoxy Colored Quartz Flooring Aggregate - http://www.epoxy.com/68.htm -to saturation at the end of each batch.  This will require about 0.5 of Epoxy.com Product #68 Seamless Epoxy Colored Quartz Flooring Aggregate per SF. Be sure to leave a wet edge to roll the next batch up against.  Continue this as you work your way across the floor.  Allow to cure 6-8 hours (typically overnight).
5. Sweep and vacuum off all loose Epoxy.com Product #68 Seamless Epoxy Colored Quartz Flooring Aggregate. Mix small batches of Epoxy.com Product #15 Clear Epoxy Seamless Flooring Resin and apply it with Squeegee at a rate of 80-90 SF per gallon.   Continue this as you work your way across the floor.  Allow to cure 6-8 hours (typically overnight).
6. If a smoother surface is required you can add addition coat(s) of Epoxy.com Product #15 Seamless  Clear Epoxy Flooring Resin, or optionally Epoxy.com Product #402 -www.epoxy.com/402.htm - 2-Component Chemical Resistant Aliphatic Polyurethane Seamless Flooring Resin with a roller.

Proper mixing and installation are critical to the success of all products. See Installation Tips, Techdata, and (M)SDS for more details, or contact us with any questions.

321-206-1833 Customer Service – Ordering and Order Status
Katey Lambert-Fontaine – Vice President & Chief Operations Officer
katey@epoxy.com

352-533-2167 Technical Support
Norm Lambert – President & Technical Support Director
info@epoxy.com

Debby Lambert, Co-Founder and Strategic Planning

Website: www.epoxy.com

24-hour Hazmat Emergency Telephone Response Service: 1-800-633-8253

[Home] [Catalog of Products] [SDS] [Online Ordering Authorization Form]