|
||
| [Contact Us] | ||
Epoxy.com Product #695
Methyl Methacrylate Hardener (Hardening Powder - BPO)
Description
Epoxy.com Product #695 Hardener Powder (BPO) for Epoxy.com MMA Flooring Systems is for use with Epoxy.com Products #691, #692, #693, #697, #698 & #699. Epoxy.com Product #695 Hardener Powder (BPO) for Epoxy.com MMA Flooring Systems dosing can be changed due to temperature and desired set time / working time. Epoxy.com Product #695 must be well mixed with Epoxy.com MMA before adding any other aggregates and fillers. After mixing the Epoxy.com Product #695 Hardening Powder into Epoxy.com MMA the polymerization reaction which leads to the hardening of the MMA begins.
Composition
Epoxy.com Product #695 is a white dry powder consisting of 50% BPO, Dibenzoylperoxide.
Technical Data | |
| Appearance | Sandy, white dry powder |
| Content of Dibenzoylperoxide and Dicydohexlphtalate |
Approximately 50% |
| Self-accelerating decomposition temperature | 140°F |
| Self-ignition temperature | >680°F |
| Solubility | Not soluble in water |
Packaging | ||
|---|---|---|
| 1/2 pound Bag | approximately 10 Volume Ounces | |
| 5 pound | 1gallon Pail | approximately 100 Volume Ounces |
| 15 pound | 3 gallon Pail | approximately 300 Volume Ounces |
| 55 pound | Box | approximately 1,100 Volume Ounces |
Use
Epoxy.com Product #695 MMA Hardener Powder must be mixed just immediately before the application of Epoxy.com MMA. All other powders and fillers must be added after Epoxy.com Product #692 and the Epoxy.com MMA resin have been well mixed together. A dosing chart is shown below. Be sure to double check with the individual technical data sheets for the Epoxy.com MMA you are mixing with Epoxy.com Product #692.
Caution
Epoxy.com Product #692 is an oxidizing agent that violently decomposes under the influence of heat or when it comes in contact with deducing agents. Do Not mix With Accelerators. Store separately from Epoxy.com MMA resins. Review MSDS information completely before using this or any other Epoxy.com Products.
Storage
Store in tight containers in dry environments below 80°F.
Mix Ratios
| PRODUCT | SUBSTRATE/MATERIAL TEMPERATURE (°F) | Epoxy.com Product #695 MMA Hardener (BPO)VOL OZ.PER GALLON OF RESIN |
| #691 MMA Primer | 30°F | 12.7 |
| 40°F | 9.0 | |
| 50°F | 7.5 | |
| 60°F | 5.5 | |
| 70°F | 3.5 | |
| 90°F | 1.8 |
| #692 MMA Flexible Membrane | 40° F | 8.0 |
| 50°F | 7.0 | |
| 60°F | 5.0 | |
| 70°F | 5.0 | |
| 90°F | 3.0-4.0 |
| Epoxy.com #693 MMA | 40°F | 5.5 |
| 50°F | 4.5 | |
| 60°F | 3.5 | |
| 70°F | 2.0 | |
| 90°F | 1.0-2.0 | |
| 1 lb. by weight of Epoxy.com Product #695 equals approximately 20 volume ounces. | ||
Information regarding Epoxy.com MMA resins and systems is based on extensive research and experience of the raw material manufacturer. By making such information available Epoxy.com does not thereby assume any liability beyond the express terms and conditions of our standard limited material warranty. Information is based on information that Epoxy.com believes to be correct, but Epoxy.com does not warrant the accuracy or completeness of any such information. We reserve the right at any time and without notice to update or improve our products and process and our information concerning the same. By Epoxy.com making this information available does not relieve the purchaser or user from his obligations to verify the suitability of our products and processes for the intended use or application.
Proper mixing and installation is critical to the optimal success of all products. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
A Vermont Corporation
USA
We have products that have passed the test of time as well as the best new Systems available today.
Since 1980 - Over 45 years of the highest quality products
Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)
Closed for lunch from 12Noon to 1PM
321-206-1833 Customer Service - Ordering and Order Status
Katey Lambert-Fontaine - Vice President & Chief Operations Officer
katey@epoxy.com
352-533-2167 Technical Support
Norm Lambert - President & Technical Support Director
info@epoxy.com
Debby Lambert, Co-Founder and Strategic Planning
Website: www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service - 1-800-633-8253
[Home] [Catalog of Products] [MSDS in Acrobat Format] [Online Ordering Authorization Form]