---

Epoxy.com Product #676

Conductive Anti-Spark Epoxy Novolac Flooring

Highly Chemically Resistant Novolac Conductive Flooring

---

DESCRIPTION

Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating is a 100% solids epoxy Novolac chemical resistant conductive epoxy floor coating ideal for severe chemical and solvent storage requiring conductive and spark proof surfaces.  Applied at a nominal 1/16", Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating offers the superior chemical resistance of an Epoxy.com  Novolac Epoxy Resin System while maintaining a conductive surface.

ADVANTAGES

• Low viscosity for improved handling during application.
• Exhibits excellent resistance to strong acids, alkalis and most industrial chemicals and solvents.
• 100% Solids low odor application and cure (0-VOC).
• Bonds well to cool, damp substrates.
•  Conductive & non sparking, 25,000 to 1,000,000 ohms resistance.

CONSIDERATIONS

• Substrate  to receive Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating temperature must be a minimum of 50°F.
• Substrate must be free of dirt, waxes, curing agents and other foreign materials.
• Steel surfaces to receive Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating must be free of grease and oils.  Abrasive blast to SSPC-SP-3.
• Refer to Epoxy.com Surface Preparation Guidelines for  substrate requirements.

COMPOSITION

100% Solids, modified polyamine, cured epoxy novolac resin and fillers

APPLICATION

SURFACE PREPARATION

Surface Preparation is the most critical portion of any successful resinous flooring system application.  All substrates must be properly prepared as outlined in Epoxy.com Surface Preparation Guidelines.  Contact epoxy.com  technical service department is pleased to answer any questions.

INSTALLATION

Installation of Epoxy.com Product #676 Novolac Novolac Epoxy Chemical Resistant Conductive Floor Coating will vary with application.  Normally spread with a trowel or squeegee and lightly back-rolled with a medium or short nap roller.  Care should be taken to minimize the entrapment of air caused by over rolling. For complete instructions, consult installation guide or Epoxy.com Technical Support Department

CLEAN-UP

Clean skin with soap and water.  Tools and equipment should be cleaned with xylene or lacquer thinner.

COVERAGE

Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating will yield approximately 32 mils when spread at 50 ft2 per gallon.  Two coats required. Epoxy.com

Check Epoxy.com Electrostatic Dissipative (ESD) and Conductive Flooring Calculator  to calculate Epoxy.com Conductive and Electrostatic Dissipative (ESD) material requirements for your installation.

COLOR

Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating is available in Standard Colors and Custom Colors as approved.

TECHNICAL DATA

Viscosity @ 75°F	1,000-1,500 cps
Mixing Ratio by volume	2 Part A to 1 Part B by Volume
Solids Content by volume	100% by volume
Volatile Organic Content	0
Weight per gallon, mixed	11.0-11.5 lbs. per gallon mixed

CURE/DRY TIME

Pot Life	20-25 min. @75°F
Dry to Touch	6-7 hours @ 75°F
Re-Coat	8-12 hours @ 75°F
Light Service	24 hours @ 75°F
Full Cure & Maximum Resistance	5 days

CHEMICAL RESISTANCE

REAGENT	RATING
Acetic Acid-10%, 30%	R
Acetone	L
Ammonia Hydroxide-38%	R
Beer	R
Bleach	L
Brake Fluid	R
Citric Acid-30%	R
Citric Acid-40%	R
Crude Oil	R
Diesel Fuel	R
Ethylene Glycol	R
Fatty Acids	R
Gasoline	R
Hydrochloric Acid-37%	R
Lactic Acid-50%	R
Lactic Acid-80%	R
Methyl Ethyl Ketone	R
Methylene Chloride	L
Nitric Acid-10%	R
Peroxide-35%	R
Phosphoric Acid	R
Skydrol	R
Sodium Hydroxide-50%	R
Sulfuric Acid-98%	R
Toluene	R
Urea	R
Vinegar	R
Xylene	R
R-Recommended for continuous service L-Limited Recommendation, occasional spills *-May cause slight stain or discoloration

MAINTENANCE

After completing the application of Epoxy.com Product #676 Novolac Epoxy Chemical Resistant Conductive Floor Coating, the installer should provide the owner with maintenance instructions. Epoxy.com Product #676 Conductive Chemically Resistant Novolac Floor Coating is easily cleaned with neutral soaps or detergents.

Secure Login